Platinum AquaSump ECO - Basement Sump Station

The installation of the Platinum AquaSump ECO is a comprehensive process requiring attention to detail to ensure optimal functionality and efficiency.

Below are the detailed steps for installing this system in a typical basement setting:

Pre-Installation Checklist:

1. Safety First: Ensure all necessary personal protective equipment (PPE) is worn throughout the installation process.
   
   

2. Tools and Materials: Gather all required tools and materials, including a saw, solvent weld adhesive, a hole saw, and any additional fittings specific to your installation.
   
   

3. Site Preparation: Clear the area where the sump station will be installed, ensuring it is free from debris and water.

Step 1: Selecting the Installation Site:

1. Identify the Lowest Point: Choose a location in the basement where water naturally collects, as this will be the most effective position for the sump station.
   
   

2. Accessibility: Ensure the site is accessible for maintenance and inspection.

Step 2: Preparing the Chamber Site:

1. Excavation: Dig a hole in the basement floor, slightly larger than the chamber’s dimensions (60cm tall x 55cm diameter). The depth should allow the chamber to sit with its lid flush with or slightly below the basement floor level.
   
   

2. Base Preparation: Lay a bed of concrete or compacted gravel at the bottom of the hole to provide a stable base for the chamber.

Step 3: Assembling the Sump Station:

1. Pump Installation: Place the KSB 301 Amadrainer pump inside the chamber. Ensure the pump is positioned so that the outlet aligns with where the discharge pipe will be installed.
   
   

2. Internal Pipework: Connect the provided internal pipework, including the non-return valve, 90-degree elbow, plain union, 1.25” tank connector, and 32mm solvent weld waste adaptor. Use solvent weld adhesive for a secure fit.
   
   

3. PVC Pipe Cutting: Measure and cut the 32mm 16bar PVC pipe to the required length, allowing it to reach the discharge point outside the basement.

Step 4: Chamber Installation:

1. Positioning the Chamber: Lower the assembled chamber into the prepared hole. Ensure it is level and stable.
   
   

2. Backfilling: Backfill around the chamber with concrete or a mix of sand and gravel, ensuring there are no voids or loose areas.

Step 5: Discharge Pipe Installation:

1. Drilling the Discharge Hole: Use a hole saw to drill through the basement wall at the appropriate height for the discharge pipe.
   
   

2. Fitting the Tank Connector: Install the tank connector to the chamber wall, ensuring a watertight seal.
   
   

3. Connecting the Discharge Pipe: Connect the PVC discharge pipe to the tank connector and run it through the hole in the basement wall to the outside. Ensure the pipe has a downward slope away from the building to aid water flow.

Step 6: Final Connections and Testing:

1. Electrical Connection: Connect the pump to a suitable power source. If required, fit a UK plug to replace the European plug supplied with the pump. Ensure that all electrical connections comply with local regulations and are carried out by a qualified electrician.
   
   

2. Testing: Fill the chamber with water to test the pump’s automatic activation and check all connections for leaks.
   
   

3. Lid Installation: Once testing is complete and the system is functioning as expected, secure the Clarke Drain HDPE frame and lid to the chamber.

Post-Installation:

1. Documentation: Keep all manuals and documentation in a safe place for future reference
   
   

2. Maintenance: Regularly inspect the system and perform maintenance as recommended by the manufacturer to ensure long-term reliability and efficiency.

Q) What is the Platinum AquaSump ECO and its primary function?

A) The Platinum AquaSump ECO is a sophisticated water management system designed to mitigate flooding and manage effluent water effectively in various settings, including residential basements, commercial buildings, and agricultural sites. Central to this system is the KSB 301 Amadrainer Automatic Pump, which is housed within a durable white HDPE chamber. The primary function of this sump station is to collect and automatically pump out effluent water, containing solids up to 10mm, to prevent water ingress and protect properties from flooding and water damage.

Q) How is the chamber of the Platinum AquaSump ECO constructed?

A) The chamber of the Platinum AquaSump ECO is constructed from high-density polyethylene (HDPE), a robust material known for its durability and resistance to environmental stresses. It measures 60cm in height and 55cm in diameter, providing ample space for the efficient operation of the KSB 301 Amadrainer pump. The white colour of the chamber not only adds to its aesthetic appeal but also signifies the material’s quality and longevity. A Clarke Drain HDPE frame and lid accompany the chamber, offering secure coverage and easy access for maintenance.

Q) What makes the KSB 301 Amadrainer Automatic Pump special?

A) The KSB 301 Amadrainer Automatic Pump is a standout feature of the Platinum AquaSump ECO, designed for effective effluent water management. This fully floodable, vertical, close-coupled, single-stage submersible motor pump is notable for its IP 68 rating, indicating its suitability for operation in up to 2m of immersion depth. It can handle solids up to 10mm, making it versatile for various applications. Additionally, it incorporates advanced features such as a magnetic switch with adjustable level control, integrated motor protection, and a triple shaft seal lubricated by barrier fluid, ensuring high operational reliability and an extended service life.

Q) What are the technical specifications of the Platinum AquaSump ECO?

A) The technical specifications highlight the system’s design and performance capabilities. The chamber material is Medium Density Polyethylene (MDPE), with a maximum volume of 110 Litres. It features a quiet operation EDPM swing check non-return valve and a 1.5” BSP male discharge connection, with an optional 40mm waste adaptor. Internal pipework and fittings comply with EN1452-2/3, ISO161/1, BS21, DIN2999, ISO7 standards, ensuring quality and durability. The system includes a KSB Amadrainer Automatic Pump and a 450mm inspection chamber lid, designed for efficient water management.

Q) What are the benefits of installing a Platinum AquaSump ECO?

A) The installation of the Platinum AquaSump ECO offers numerous benefits, including enhanced durability and longevity, thanks to the high-quality MDPE and HDPE materials used in its construction. The KSB 301 Amadrainer pump ensures high efficiency and significant water management capabilities, leading to energy and cost savings over time. The system’s easy installation process, versatility in handling solids up to 10mm, and integrated safety features, such as motor protection and a triple shaft seal, guarantee operational reliability and minimal maintenance needs. These attributes make it an essential utility for maintaining dry and safe conditions in susceptible areas.

Q) In what applications can the Platinum AquaSump ECO be used?

A) The Platinum AquaSump ECO is versatile and suitable for a wide range of applications. It is ideal for residential basements and cellars to manage water ingress and prevent flooding. In commercial buildings, it helps protect assets and infrastructure from water damage due to flooding. Agricultural settings can benefit from its ability to drain pits, shafts, and flood-prone areas, while construction sites may use it to extract water from excavation sites. Additionally, it is perfect for managing surface water levels in landscaped areas, gardens, and other outdoor spaces, thus preventing erosion and waterlogging.

Q) How does the Platinum AquaSump ECO handle solids?

A) The KSB 301 Amadrainer Automatic Pump within the Platinum AquaSump ECO is adept at handling effluent containing solids up to 10mm. This capability is crucial for applications where the water to be managed is not purely liquid but contains small solid particles. The pump’s design, including its fully floodable nature and vertical, close-coupled, single-stage submersible motor, is optimized to ensure that solids are efficiently processed without clogging the system, maintaining a smooth and reliable operation.

Q) What maintenance is required for the Platinum AquaSump ECO?

A) While the Platinum AquaSump ECO is designed for reliability and minimal maintenance, regular inspections and upkeep are essential to ensure long-term functionality. Maintenance tasks include checking the pump and chamber for debris or blockages, verifying the operation of the non-return valve to prevent backflow, and ensuring the discharge pipe is clear and properly aligned. It’s also advisable to test the pump’s automatic activation periodically by filling the chamber with water. Any electrical connections should be inspected for integrity and safety. Following the manufacturer’s guidelines for maintenance and promptly addressing any issues will help sustain the system’s efficiency and extend its service life.

Q) Is the Platinum AquaSump ECO energy efficient?

A) Yes, energy efficiency is a hallmark of the Platinum AquaSump ECO, particularly attributed to the KSB 301 Amadrainer Automatic Pump’s design. This pump is engineered to provide significant water management capabilities while minimizing energy consumption. Its operational efficiency means that it can handle a substantial volume of water, effectively managing flood risks and effluent water, without incurring high energy costs. This efficiency, coupled with the system’s integrated motor protection and optimised hydraulic systems, contributes to both environmental benefits and cost savings over the lifespan of the product.

Q) What safety features does the Platinum AquaSump ECO incorporate?

A) The Platinum AquaSump ECO includes several safety features designed to protect both the system and its users. The integrated motor protection prevents damage to the pump in case of overload, ensuring its longevity. The triple shaft seal, lubricated by barrier fluid, is another critical safety feature, providing high motor reliability and safeguarding against leaks, even if the pump runs dry. Additionally, the non-return valve ensures that water flows in one direction only, preventing backflow and potential flooding. The Clarke Drain HDPE frame and lid that cover the chamber also serve as a safety feature, preventing accidental entry into the chamber and ensuring that the system remains tamper-proof.

Q) What is the maximum volume the chamber can hold?

A) The chamber of the Platinum AquaSump ECO has a maximum volume capacity of 110 Litres. This capacity is designed to accommodate a significant amount of effluent water, ensuring that the system can handle heavy rainfall or flooding events efficiently before the pump activates to remove the water. The size and capacity of the chamber are optimised to balance between holding a sufficient volume of water and maintaining a compact footprint for installation in various settings, including tight spaces.

Q) How does the magnetic switch with adjustable level control work?

A) The magnetic switch with adjustable level control is a sophisticated feature of the KSB 301 Amadrainer Automatic Pump, designed to enhance the system’s operational reliability and flexibility. This switch activates the pump automatically when the water level in the chamber reaches a predetermined height, ensuring timely effluent water management without manual intervention. The adjustability of the level control allows users to customise the activation point of the pump based on specific needs or conditions, providing greater control over water management. This feature is particularly useful in preventing flooding by ensuring the pump activates at the most effective time to manage water levels efficiently.

Q) What is the significance of the system’s IP 68 rating?

A) The IP (Ingress Protection) 68 rating of the KSB 301 Amadrainer Automatic Pump within the Platinum AquaSump ECO signifies its high level of protection against ingress of dust and water. An IP68 rating is one of the highest levels of protection available, indicating that the pump is fully dust-tight and can be immersed in water up to a depth of 2 metres continuously without sustaining damage. This rating is crucial for the pump’s reliability and durability, especially in applications where it might be exposed to water for extended periods. It ensures that the pump can operate efficiently in wet conditions, such as in flooded basements or cellars, providing peace of mind and long-term performance.

Q) What are the dimensions of the system’s riser/lid?

A) The system includes a 450mm inspection chamber lid, designed to provide secure and easy access to the sump station for maintenance and inspection. The size of the riser/lid is optimally chosen to cover the chamber while allowing sufficient space for accessing the internal components, such as the pump and pipework. This lid is constructed from the same high-quality HDPE material as the chamber, ensuring durability and resistance to environmental elements. Its design integrates seamlessly with the chamber, maintaining the system’s overall integrity and safety.

Q) How is the non-return valve beneficial?

A) The quiet operation EDPM swing check non-return valve is a key component of the Platinum AquaSump ECO, providing significant benefits in terms of system efficiency and protection. This valve allows water to flow in one direction — out of the chamber and through the discharge pipe — while preventing backflow into the chamber. This is crucial in preventing the recycled flow of pumped out water back into the basement or cellar, which could lead to flooding and water damage. The quiet operation of the valve ensures that the system runs smoothly and silently, minimising noise disruption, which is especially beneficial in residential settings.

Q) What materials comply with the internal pipework and fittings?

A) The internal pipework and fittings of the Platinum AquaSump ECO are manufactured to comply with several key standards, ensuring quality, durability, and compatibility. These standards include EN1452-2/3, ISO161/1, BS21, DIN2999, and ISO7. Compliance with these standards means that the pipework and fittings are suitable for the demands of effluent water management, capable of withstanding the pressures and environmental conditions they will be exposed to. This adherence to high-quality standards ensures that the system’s internal components are reliable and capable of delivering optimal performance.

Q) Can the discharge connection be adapted to different sizes?

A) Yes, the Platinum AquaSump ECO offers flexibility in terms of the discharge connection size. The standard discharge connection is a 1.5” BSP male, suitable for a wide range of applications. However, for installations requiring a different size, an optional 40mm waste adaptor is supplied, allowing for easy adaptation to varying requirements. This versatility ensures that the sump station can be integrated into existing drainage systems with ease, providing a solution that is both effective and convenient for users.

Q) What kind of maintenance is recommended for the KSB 301 Amadrainer Pump?

A) To ensure the long term reliability and efficiency of the KSB 301 Amadrainer Pump within the Platinum AquaSump ECO, regular maintenance is essential. This includes periodic checks for debris or blockages in the pump and the chamber, ensuring the non-return valve is functioning correctly to prevent backflow, and verifying that the discharge pipe remains clear and properly aligned. Additionally, the pump’s automatic activation should be tested by filling the chamber with water to ensure it operates as expected. Any signs of wear or damage should be addressed promptly to prevent system failure. Adhering to the manufacturer’s maintenance guidelines and scheduling routine inspections will help maintain the pump’s performance and extend its service life.

Q) How do you test the system’s automatic activation?

A) Testing the automatic activation of the Platinum AquaSump ECO is a critical step in both initial setup and ongoing maintenance. To conduct this test, gradually fill the chamber with water until the level reaches the pump’s activation point. The pump should automatically start and begin pumping the water out of the chamber through the discharge pipe. Observe the operation to ensure it is smooth and that the water level decreases as expected. This test confirms the pump’s responsiveness to rising water levels and its ability to effectively manage effluent water. Regular testing as part of maintenance routines ensures the system remains in optimal working condition.

Q) Is the Platinum AquaSump ECO suitable for high temperature environments?

A) The KSB 301 Amadrainer Automatic Pump within the Platinum AquaSump ECO is designed to operate efficiently in environments with temperatures up to 50°C. This capability makes the system suitable for use in a variety of settings, including those that may experience higher temperatures. However, it’s important to ensure that the installation site and operational conditions do not exceed the pump’s specified temperature tolerance to maintain its efficiency and prevent damage. For environments with extreme temperature conditions, additional precautions or measures may need to be considered to ensure the system’s longevity and reliability.

Q) What should be done if the system experiences a blockage?

A) If the Platinum AquaSump ECO experiences a blockage, it’s important to address the issue promptly to prevent system failure and potential flooding. Begin by disconnecting the pump from the power source to ensure safety. Inspect the chamber, pump inlet, and discharge pipe for debris or solids that may have caused the blockage. Clear any obstructions found, taking care not to damage the system’s components. Once the blockage has been removed, reconnect the power and test the system to ensure it is operating correctly. Regular maintenance and inspections can help prevent blockages by identifying and addressing potential issues before they lead to system failures.

Q) How does the system’s integrated motor protection work?

A) The integrated motor protection feature of the KSB 301 Amadrainer Automatic Pump within the Platinum AquaSump ECO is designed to safeguard the pump against damage due to overload conditions. This protection mechanism monitors the motor’s operation, detecting any instances of excessive load or heat that could harm the motor. In such cases, the protection system automatically shuts down the pump to prevent damage, allowing it to cool down before it can be restarted. This feature ensures the pump’s longevity and reliability, preventing costly repairs and downtime due to motor damage.

Q) Can the sump station handle rapid inflows of water?

A) The Platinum AquaSump ECO, equipped with the KSB 301 Amadrainer Automatic Pump, is designed to manage significant volumes of effluent water efficiently. The system’s maximum chamber volume of 110 Litres and the pump’s capacity to handle flow rates up to 2.75 litres per second allow it to cope with rapid inflows of water, such as during heavy rainfall or flooding events. The pump’s automatic activation and adjustable level control ensure that water is pumped out promptly, preventing overflow and maintaining effective water management even under challenging conditions.

Q) What considerations should be taken when choosing an installation site within a basement?

A) Choosing the right installation site within a basement for the Platinum AquaSump ECO is crucial for its effectiveness. The site should be at the lowest point in the basement where water naturally collects, ensuring that the system can capture and manage water ingress efficiently. Accessibility for maintenance and inspection is also important, allowing for easy access to the chamber, pump, and internal components. Additionally, consider the location of the discharge pipe and ensure that there is a clear path for water to be pumped out of the basement. Taking these factors into account will help maximise the system’s performance and reliability.

Q) How does the triple shaft seal enhance the system’s reliability?

A) The triple shaft seal in the KSB 301 Amadrainer Automatic Pump is a critical feature that enhances the system’s reliability by providing superior protection against leaks and preventing water from entering the motor housing. This seal system includes three separate sealing mechanisms, each designed to offer an additional layer of protection. The seals are lubricated by barrier fluid, ensuring smooth operation and reducing wear over time. This arrangement not only protects the motor from water damage but also ensures that the pump can operate efficiently, even under challenging conditions, such as when managing water containing solids. The triple shaft seal’s durability and protective capabilities significantly contribute to the pump’s high operational reliability and extended service life.

Q) What is the purpose of the swing check valve?

A) The swing check valve, specifically the quiet operation EDPM model included with the Platinum AquaSump ECO, serves a crucial role in preventing backflow of water into the chamber and basement. This valve automatically opens to allow water to be pumped out through the discharge pipe and closes when the pump stops, preventing water from flowing back into the chamber. Its design ensures a smooth, quiet operation, reducing noise and enhancing the system’s efficiency. This valve is essential for maintaining the effectiveness of the water management system, ensuring that once water is pumped out, it does not re-enter the basement, thereby protecting the property from water damage.

Q) How do the system’s compliance with various standards benefit the user?

A) The Platinum AquaSump ECO’s compliance with various standards, including EN1452-2/3, ISO161/1, BS21, DIN2999, and ISO7, benefits the user by ensuring the system’s quality, durability, and reliability. These standards govern the materials, design, and manufacturing processes of the system’s components, ensuring they meet high-quality benchmarks. For the user, this means peace of mind knowing that the system is built to last and perform effectively, reducing the likelihood of failures and the need for frequent maintenance. Compliance with these standards also signifies that the sump station is suitable for a wide range of applications, providing versatility and efficiency in water management.

Q) Are there any limitations to the Platinum AquaSump ECO’s performance?

A) While the Platinum AquaSump ECO is designed for high efficiency and reliability in managing effluent water and preventing flooding, there are limitations to its performance that users should be aware of. The system is optimized to handle water containing solids up to 10mm in size; larger solids may cause blockages or impair the pump’s performance. The pump’s IP 68 rating allows for immersion up to 2m, so deeper water levels may exceed the system’s operational capacity. Additionally, the system’s maximum temperature tolerance is 50°C; environments exceeding this temperature could affect its functionality. Understanding these limitations ensures that the system is used within its operational parameters, maintaining its efficiency and extending its service life.

Basic Chamber Specification



KSB 301 Amadrainer Automatic Pump Instructions